SIDRA Glossary of Road Traffic Analysis Terms

Aerial photograph of road

Glossary search

A

A model to estimate acceleration and deceleration distance and time values, as well as second-by second speed and acceleration rate values during a vehicle speed change cycle, e.g. polynomial acceleration model, uniform model, and so on. See Four-Mode Elemental Model.

Method used in signal timing calculations corresponding to the way traditional Vehicle-Actuated signals operate. See Fixed-Time (Pretimed) Signal Analysis.

A signal control method that allows variable phase sequence and variable timings of signal displays depending on vehicle and pedestrian traffic demands identified by detector actuations subject to various signal controller settings. See Fixed-Time (Pretimed) Signal Control.

Parameters relevant to traditional actuated signal control and used in actuated signal analysis, including gap setting, minimum green time, maximum green time, and effective detection zone length. See Actuated Signal Analysis, Actuated Signal Control, Detection Data.

See Actuated Signal Data.

See Exclusive Pedestrian Phase.

The signal control interval for the clearance of conflicting movements within the controlled area when only red signal displays are shown following the yellow signal display. See Intergreen Interval, Yellow Interval.

Duration of the All-Red Interval. See Intergreen Time, Yellow Time.

An intersection with stop signs on all approaches. The driver’s decision to proceed is based on a consensus of right-of way governed by the traffic conditions of the other approaches and the rules of the road (e.g. the driver on the right has the right-of way if two vehicles arrive simultaneously).

An intersection or interchange created by rerouting one or more movements (often turning movements) from their usual places to secondary junctions. These include Continuous Flow Intersections (CFI), Diverging Diamond Interchanges (DDI), also called Double Crossover Diamond (DCD), Displaced Left-Turn (DLT) intersections or interchanges, Median U-turn (MUT) intersections, Restricted Crossing U-turn (RCUT) intersections, and so on. See At-Grade Intersection, Common Control Group, Grade-Separated Intersection, Interchange, Intersection, Paired Intersection, Site.

The time interval selected for the analysis of traffic demand flow conditions, e.g. AM 15-min or 30-min peak flow period. See Flow Period, Off-Peak Period, Peak Flow Period, Peaking Parameters, Total Flow Period.

A model that use direct mathematical computations (with a theoretical and empirical basis) to determine system states, using algorithms and iterative approximation techniques for complex systems. Depending on the level of aggreagation of model elements, an analytical model can be microscopic, mesoscopic or macroscopic. See Simulation Model.

A set of lanes at an intersection or a midblock location that accommodates all movements approaching from a given direction.

The type of control that applies to an approach at a Two-Way Sign Control intersection, namely Major Road, Giveway/Yield or Stop. See Two-Way Sign Control (TWSC), Giveway/Yield , Stop.

Midblock distance between two intersections in the approach travel direction on an intersection leg. See Downstream Distance, Exit Distance.

See Movement (Traffic Movement)

See Cruise Speed.

See Approach Distance.

A general factor used to adjust the saturation flow rate at signals for the effect of environment (pedestrians, parking maneouvres, buses and taxis, small radius turns and so on).

The number of vehicles or pedestrians per unit time arriving at a reference point. The arrival flow rate at a downstream point may be less than the demand flow rate due to upstream capacity constraint, i.e. when the upstream departure flow rate is restricted to the capacity flow rate because the demand flow rate exceeds capacity (oversaturated conditions). See Capacity Constraint, Demand Flow Rate, Departure Flow Rate, Volume.

Six assigned categories for the quality of progression for a given movement at a signalized intersection approach, either as an input parameter to determine coordination effects using a simple platoon model in single intersection analysis (as opposed to network analysis) where signal offset information is not available, or as an output parameter using the signal offset method for coordination effects in network analysis. See Arrivals During Green, Coordination, Offset, Platoon, Platoon Ratio, Progression, Progression Factor.

A parameter used for the percentage of traffic arriving during the green period as a measure of progression quality for a movement at a signalised intersection, either as an input parameter to determine coordination effects using a simple platoon model in single intersection analysis (as opposed to network analysis) where signal offset information is not available, or as an output parameter using the signal offset method for coordination effects in network analysis.. See Arrival Type, Coordination, Offset, Platoon, Platoon Ratio, Progression, Progression Factor.

An intersection where roads with conflicting traffic movements meet at the same level. See Alternative Intersections and Interchanges, Grade-Separated Intersection, Interchange, Intersection.

A vehicle which takes over all or a portion of the driving task by providing a range of driver-assist capabilities up to and including self-driving.  See Connected Vehicle, Connected and Automated Vehicle (CAV)

The travel distance divided by the average travel time. See Average Travel Time.

The travel time including the effect of intersection delays and delays due to other causes of interruption as well as the traffic delay (uninterrupted flow delay) due to bunching in uninterrupted sections of travel. See Bunching, Cruise Speed, Desired Speed, Free-Flow Speed, Interrupted Flow, Space-Mean Speed, Speed, Time-Mean Speed, Traffic Delay, Uninterrupted Flow.

B

The maximum backward extent of the queue in a lane at an intersection or a crossing relative to the stop line or give-way / yield line during a signal cycle or gap acceptance cycle. The last queued vehicle that joins the back of queue is the last vehicle that departs at the end of the saturated part of green interval or the available gap interval. See Cycle, Queue at the Start of Green, Cycle-Average Queue, Gap Acceptance Cycle, Percentile Queue, Queue, Queue Distance, Queue Move-up.

The saturation flow rate achievable under ideal conditions at signals with no effects that reduce the steady queue discharge rate during the green period. See Basic Saturation Flow Rate, Movement, Movement Class, Passenger Car Equivalent, Saturation Flow Rate, Through Car Equivalent.

A gap acceptance cycle consisting of a block period and an unblock period, i.e. vehicles waiting due to lack of an acceptable gap, then departing when an acceptable gap occurs, similar to a signal cycle that consists of a red period and a green period. See Cycle, Gap Acceptance Cycle.

A condition in road networks where the back of a queue from a downstream intersection lane extends beyond the available queue storage length (lane length) and blocks traffic movements at upstream intersection lanes, resulting in capacity losses at upstream intersection lanes. See Blockage Calibration Factor, Blockage Tolerance, Probability of Blockage, Queue Spillback.

A factor used to adjust the effect of the downstream lane blockage (queue spillback effect) on the upstream lane capacity. See Blockage, Blockage Tolerance, Probability of Blockage, Queue Spillback.

A value subtracted from the probability of blockage in reducing the capacity of the upstream lane to allow for the effect of downstream lane blockage (queue spillback effect). See Blockage, Blockage Calibration Factor, Probability of Blockage, Queue Spillback.

A characteristic of uninterrupted traffic flow in which some vehicles travel together as moving queues at relatively small headways. Bunches in uninterrupted trafic are considered to be random in size and occurrence in the stream in undersaturated conditions. The proportion of bunched vehicles in the traffic stream determined as a function of the flow rate is used in the bunched exponential model of headway distributions. See Extra Bunching, Platoon.

A method by which buses are given an advantage over other traffic, usually using bus priority lanes, special signal phases or signal preemption. See Preemption.

The number of buses stopping per hour (bus stopping rate) used to calculate a saturation flow reduction factor to allow for buses stopping and blocking traffic in a lane considering both the near-side and the far-side bus stops.

See Slip Lane.

C

The process by which the analyst selects the model parameters that result in the best reproduction of field-measured local traffic conditions by the model. See Validation.

Parameters provided for easy calibration of various models.

Parameters included in a model to facilitate calibration of the model for local conditions.

The maximum sustainable flow rate at which vehicles or persons can reasonably be expected to traverse a point or uniform segment of a lane or roadway during a specified time period under prevailing roadway, geometric, traffic, environmental, and control conditions; usually expressed as vehicles per hour, passenger cars per hour, or persons per hour. See Gap Acceptance Capacity.

Quantitative techniques for measuring the effectiveness of existing transport facilities in moving traffic and people, and for determining the impacts of proposed system improvements such as additional traffic lanes, signal timing adjustments, or enhanced public transport services. Capacity analysis is not restricted to roads but includes concepts and methods for pedestrians and cyclists on footpaths and bicycle facilities.

The process by which the departure flow rate from a lane is restricted to the capacity flow rate under Oversaturated Conditions where the demand flow rate exceeds the capacity. See Capacity, Demand Flow Rate, Departure Flow Rate.

That portion of a road or bridge devoted particularly to the use of vehicles, inclusive of shoulders and auxiliary lanes.

See Connected and Automated Vehicle.

The circular or other specially shaped central island constructed or marked at a roundabout around which traffic circulates.

The flow rate of vehicle traffic in all lanes of the circulating road in advance of each roundabout entry point, i.e. passing in front of each splitter island next to the subject entry, which is the opposing (conflicting) flow for the vehicles entering the roundabout. Circulating flow rates at a roundabout are determined using departures flow rates that are subject to capacity constraint as measured at entry (approach) points. See Capacity Constraint, Circulating Road, Departures Flow Rate.

The carriageway surrounding the central island of a roundabout on which circulating vehicles travel.

The width of the Circulating Road measured for each roundabout entry.

The first part of the clearance (Flashing Don't Walk) interval for a pedestrian movement at signals which occurs before the Terminating Intergreen Interval (yellow and all-red intervals) for parallel vehicle movements. See Clearance Time.

The second part of the clearance (Flashing Don't Walk) interval for a pedestrian movement at signals, which follows the Clearance 1 Interval and overlaps with part of the Terminating Intergreen Interval (yellow and all-red intervals) for parallel vehicle movements. See Clearance Time.

See Clearance 2 Interval.

The time given for pedestrians to travel the crossing distance (the controlled area) at crossing speed before the beginning of conflicting vehicle movements at a signalised intersection or a midblock signalised pedestrian crossing. See Crossing Distance, Crossing Speed.

A group of signalised intersections controlled by a single signal controller. This is relevant to signal-controlled facilities that can be modelled as a network including signalised paired (closely-spaced) intersections such as staggered T intersections, freeway interchanges, intersections with median controlled by signals, fully signalised roundabouts and Alternative Intersections and Interchanges. See At-Grade Intersection, Grade-Separated Intersection, Interchange, Intersection, Paired Intersection, Site.

A simple network performance measure determined as the ratio of desired speed to average travel speed. See Desired Speed, Average Travel Speed.

Road traffic conditions that arise under high demand flow conditions in interrupted and uninterrupted road traffic facilities where persistent queuing with high levels of overflow queues (signal cycle failures), capacity losses due to downstream queue blockages (queue spillback), long delays and travel times, high stop rates, slow traffic speeds and high densities are observed. See Blockage, Overflow Queue, Oversaturated Conditions, Queue Spillback.

A vehicle that combines self-driving and connectivity features, allowing safe operation in platoons at shorter headways than possible by human-driven vehicles or automated vehicles that use adaptive cruise control only.  See Automated Vehicle, Connected Vehicle

A vehicle capable of transmitting data about its status to its surroundings (e.g. road infrastructure, other road users) and receiving information about its surroundings (e.g. traffic conditions, weather conditions, presence of potential conflicting vehicles, traffic control) that can be used to adjust driving behaviour in response to conditions present at a given time and location.  See Automated Vehicle, Connected and Automated Vehicle (CAV)

See Uninterrupted Flow.

The time lost during negotiation of an intersection including all stop-start and slow down (deceleration and acceleration) delays and stopping (idling) times. Control delay is the sum of stopline delay and geometric delay. See Delay, Geometric Delay, Idling, Queuing Delay, Stopline Delay.

See Signal Controller.

The approach with the queue detector at a roundabout with metering signals. This is the approach helped by the metering signals. See Metered Approach, Roundabout Metering Signals.

A signalised intersection which is part of a coordinated signal system. See Coordination.

A system to coordinate (synchronize) signal phases at two or more signalised intersections or signalised pedestrian crossings to achieve good progression of vehicle platoons with less delay, queuing and stops due to arrival of more vehicles during green signals. See Progression.

A measure that includes the direct vehicle operating cost (the resource cost of fuel and additional running costs including tyre, oil, repair and maintenance as a factor of the cost of fuel) as well as the time cost of vehicle occupants.

The minimum time (Headway) between successive vehicles in the opposing (major) traffic stream that is acceptable for entry by opposed (minor) stream vehicles. See Headway.

The intersection in a coordinated signal system that operates with the highest overall degree of saturation during a given period.

The lane in a lane group or approach that has the highest degree of saturation and places the highest demand on green time.

The set of vehicle and pedestrian movements that determine the capacity and timing requirements of a signalised intersection.

A formal area set aside for specific modes of transport to cross the road; usually called pedestrian crossing, cycle (bicycle) crossing, railway (level) crossing, signalised crossing, pelican crossing, puffin crossing, zebra crossing, and so on. See Pedestrian Crossing, Zebra Crossing.

The kerb-to-kerb distance for pedestrians crossing the road. This is used in determining pedestrian clearance time settings at signalised intersections and midblock signalised pedestrian crossings. See Clearance Time (Pedestrians), Crossing Speed, Full Crossing, Staged Pedestrian Crossing.

The speed of pedestrians crossing the road as measured at intersections and midblock pedestrian crossings (as distinct from off-road pedestrian walking speeds). The design speed for determining pedestrian clearance time settings at signalised intersections and midblock signalised pedestrian crossings is a percentile speed. See Clearance Time (Pedestrians), Walking Speed.

The uninterrupted travel speed, i.e. the midblock speed of a vehicle on the approach or exit side of an intersection (between intersections) without the effect of intersection delays, that can be approximated by the speed limit adjusted for the effects of side friction, road geometry and traffic volume. See Average Travel Speed, Desired Speed, Free-Flow Speed, Space-Mean Speed, Speed Time-Mean Speed, Traffic Delay.

See Kerb.

A complete sequence of signal phases.

A condition where one or more queued vehicles are not able to depart because of insufficient capacity during the signal cycle or gap acceptance cycle at an intersection. See Cycle, Gap Acceptance Cycle, Overflow Queue, Queue Move-up.

The time required for one complete sequence of signal displays (sum of phase green and intergreen times). For a given movement, cycle time is the sum of the durations of red, yellow and green signal displays, or the sum of effective green and red times. In gap acceptance analysis, this is the equivalent average cycle time corresponding to the block and unblock periods in the opposing traffic stream. See Cycle, Effective Green and Red Times, Gap Acceptance Cycle, Network Cycle Time.

The average queue length that incorporates all queue states including zero queues as counted at regular intervals (e.g. every 5 seconds) in a lane at an intersection or a crossing. See Back of Queue, Queue at the Start of Green, Percentile Queue, Queue, Queue Distance, Queue Move-up.

D

The ratio of arrival (demand) flow rate to capacity during a given flow period. Also known as the volume to capacity ratio (v/c ratio), utilisation ratio, utilisation factor and traffic intensity.

The additional (excess) travel time experienced by a vehicle or pedestrian relative to a base travel time, e.g. the free-flow travel time. Average delay considering all vehicles or pedestrians that are queued and not queued is a common performance measure used for intersection and network analysis. For vehicle traffic in oversaturated conditions, two distinct delay measurement methods are (i) delay to vehicles arriving during a given analysis period including the delay experienced after the end of the analysis period until the departure of the last vehicle arriving during the analysis period, measured using the path-trace (instrumented car) method, and (ii) delay experienced by vehicles in the queue during the analysis period only, measured using the queue-sampling method which involves counting the number of vehicles in the queue at regular intervals. See Control Delay, Geometric Delay, Idling, Queuing Delay, Stopline Delay, Traffic Delay.

The number of vehicles or pedestrians arriving during a given period as measured upstream of the back of queue (as distinct from departure flows measured in front of the queue). See Arrival Flow Rate, Departure Flow Rate, Volume.

The number of vehicles per unit distance along a road segment as measured at an instant in time.

The number of vehicles per unit time departing from the queue, or the number of unqueued vehicles passing, as measured at the stop line (or give-way / yield line). The average departure flow rate is the same as the demand flow rate for Undersaturated Conditions, and is limited to the capacity flow rate for Oversaturated Conditions. See Arrival Flow Rate, Capacity Constraint, Demand Flow Rate, Departure Headway, Volume.

The average time between departures of successive vehicles on a given approach lane at an all-way STOP-controlled intersection. The corresponding lane capacity is 3600 / Departure Headway (AWSC).

As a general traffic parameter, this is the average headway value of vehicles departing from the queue, or the average headway value of unqueued vehicles passing, as measured at the stop line (or give-way / yield line). See Departure Flow Rate, Departure Headway (AWSC).

The number of years into the future for which a traffic facility operates at a satisfactory level of performance considering increases in vehicle and pedestrian traffic demand volumes. See Design Life Analysis, Growth Model, Growth Rate, Compound Growth, Uniform Growth.

A method to determine the design life of a facility by assessing changes in estimates of capacity and performance measures as a function of increases in vehicle and pedestrian traffic demand volumes using uniform or compound growth rates per movement and movement class during a number of years. See Design Life, Growth Model, Growth Rate, Compound Growth, Uniform Growth.

A parameter used for determining various network and route performace and level of service measures. A value representing the midblock cruise speeds on a route or a network is appropriate. See Congestion Coefficient, Cruise Speed, Traffic Delay, Free-Flow Speed, Speed Efficiency, Travel Time Index, Network (Route) Level of Service.

Parameters relevant to vehicle detection in traditional actuated signal control and used in actuated signal analysis, including effective detection zone length. See Actuated Signal Analysis, Actuated Signal Control, Actuated Signal Data.

See Effective Detection Zone Length.

A device by which the presence and/or passage of vehicles or pedestrians is registered. The most common detectors are inductive loop detectors for vehicles and push-button detectors for pedestrians.

One or more loops of wire embedded in the road surface used to detect vehicles.

A method to specify an exclusive pedestrian phase at a signalised intersection. See Exclusive Pedestrian Phase, Scramble-Crossing Phase.

An interchange form where one diagonal connection is made for each freeway entry and exit, with a single ramp (connection) in each quadrant.

The phase or movement green and red times that are displayed by the signal controller. See Effective Green and Red Times, End Gain, Lost Time, Start Loss.

A diamond interchange form where through traffic on the arterial switches sides of the road at each of the ramp terminals, allowing turning movements to the ramps to be made without conflict from opposing through traffic.

In the direction of the movement of traffic.

The travel distance associated with a traffic movement from the approach stop line (give-way / yield line) to a specified downstream point on the exit road. See Approach Distance, Exit Distance, Negotiation Distance.

Parameters used in fuel consumption and emission models, mainly related to rolling resistance and aerodynamic drag.

Imaginary movements used in traffic signal timing analysis.

E

The phase interval used at the end of a phase to terminate some movements earlier than other movements in the same phase. This is typically used at paired intersections operating under a single signal controller (Common Control Group) to clear movements in the internal (downstream) approach lanes by terminating upstream movement green periods sooner. See Late Start.

The effective length of the detection zone on a signalised intersection approach where a vehicle can be detected by the signal controller with use of in-pavement loops or other technology. The value of this parameter includes allowance for detector sensitivity. See Actuated Signal Data.

The movement green and red times for capacity and performance analysis purposes, which are determined by adjusting the displayed green and red times for start loss and end gain effects. See Displayed Green and Red Times, End Gain, Lost Time, Start Loss.

An aggregate measure of intersection capacity determined as the ratio of total intersection demand flow to the intersection degree of saturation, where the intersection degree of saturation is the largest lane degree of saturation considering all lanes of the intersection.

The average number of stops per vehicle or pedestrian considering all vehicles or pedestrians queued and unqueued. For vehicles, this is expressed in equivalent stop values to normalise the stop values in relation to initial and final speeds during stop and slow-down manoeuvres including the major stops, queue move-ups, slow downs at the back of the queue and the slow-down and speed-up manoeuvre associated with geometric delay. Unlike proportion queued, the effective stop rate can be higher than 1.0. See Major Stop, Proportion Queued, Queue Move-up, Slow Down.

The parameter used in fuel consumption and emission models, which relates fuel consumption or emission to the total power provided by the engine.

A model to estimate emissions by vehicles using a traffic facility, including pollutant emissions that affect the air quality for people living near a road (hydrocarbon, carbon monoxide, nitrogen oxide, and so on) or greenhouse gas emissions that contribute to global warming (carbon dioxide). See Four-Mode Elemental Model, Fuel Consumption Model, Instantaneous Model, Operating Cost Model, Vehicle Parameters.

The maximum number of opposed stream vehicles that can depart after the end of the displayed green interval at signalised intersections. Also referred to as sneakers. See Minimum Departures.

Time between the end of the displayed green interval and the end of the effective green period for a movement, which is associated with additional departures after the end of green interval. See Lost Time, Start Loss.

Adjustment of the follow-up headway and critical gap values of a roundabout entry movement to calibrate the capacity values obtained under low circulating flow rates, especially when the ratio of entry flow to circulating flow is high. The adjustment (decrease in follow-up headways and critical gaps, therefore increase in capacity) is effective for low to medium circulating flow rates. See Environment Factor.

The angle of conflict between the entering and circulating streams measured for each roundabout entry (approach).

The minimum radius of curvature of the outside kerb line at entry, i.e. at the give-way (yield) line measured for each roundabout entry (approach). See Negotiation Radius, Turn Radius,

A parameter used to calibrate the roundabout capacity model to allow for less restricted (higher capacity) and more restricted (lower capacity) roundabout environments. Higher capacity conditions could be a result of factors such as good visibility, more aggressive and alert driver attitudes (smaller response times), smaller vehicles in the vehicle population, negligible pedestrian volumes, and insignificant parking and heavy vehicle activity (goods vehicles, buses, trams stopping on approach roads). Lower capacity (more restricted) conditions could be a result of factors such as compact roundabout design (perpendicular entries), low visibility, relaxed driver attitudes (slower response times), larger vehicles in the vehicle population, high pedestrian volumes, and significant parking and heavy vehicle activity (goods vehicles, buses, trams stopping on approach roads). See Entry / Circulating Flow Adjustment.

The signal timing method using the equal degree of saturation (EQUISAT) principle for allocating green times to critical movements in signal control. See Fixed-Time (Pretimed) Signal Analysis, Green Time, Green Split Priority, Phase Time, Practical Degree of Saturation.

The value of a deceleration-acceleration cycle in terms of a major stop-start cycle. See Major Stop.

A lane allocated for use only by a particular OD movement or movement class, e.g. left-turn lane, through lane, right-turn lane, bus lane, as opposed to a shared lane. See Lane Discipline, Movement, Movement Class, Shared Lane.

A phase at a signalised intersection during which all pedestrian displays are green (Walk) and all vehicle displays are red, allowing all pedestrian movements to operate simultaneously while all vehicle movements are stopped. See Diagonal Crossing, Scramble-Crossing Phase.

The midblock distance between two intersections in the exit travel direction on an intersection leg. See Approach Distance, Downstream Distance.

See Cruise Speed.

A percentage of exiting traffic flow to be added to the opposing flow rate for an entry movement at a roundabout or a minor road movement at a two-way sign controlled intersection although the movement exiting to the road adjacent to the subject entry / minor road movement is not conflicting.

See Gap Setting.

An increase applied to the proportion of bunched vehicles in the traffic stream according to the proximity of, and level of queuing at, upstream signalised intersections. See Bunching.

F

A turning movement that must give way to and find safe gaps in conflicting (opposing) vehicle or pedestrian traffic before proceeding, e.g. filter turn, slip (bypass) lane turn, turn on red. See Opposed Movement.

A method used in signal timing calculations corresponding to the way fixed-time (pretimed) signals operate, or to the average cycle time and phase time values of control systems that use the equal degree of saturation (EQUISAT) principle, e.g. SCATS. See Actuated Signal Analysis, Cycle Time, EQUISAT Method, Fixed-Time (Pretimed) Signal Control, Phase Time.

A signal control method that allows for only a fixed sequence and fixed duration of displays. See Actuated Signal Control.

The time interval selected for vehicle and pedestrian traffic demand flow conditions. See Analysis Period, Off-Peak Period, Peak Period, Total Flow Period.

See Lane Movement Flow Proportions.

The number of vehicles or pedestrians per unit time passing (arriving or departing) a given reference point. See Arrival Flow Rate, Demand Flow Rate, Departure Flow Rate, Volume.

The ratio of arrival flow rate to saturation flow rate for a movement at a signalised intersection.

A factor used to increase or decrease the vehicle and pedestrian traffic demand flow rate in order to test changes in estimates of capacity and performance measures. See Flow Scale Analysis.

A method to assess changes in estimates of capacity and performance measures as a function of increases or decreases in vehicle and pedestrian traffic demand volumes using flow scales (per movement and movement class for vehicles). See Flow Scale.

The average headway between successive opposed (minor) stream vehicles entering a gap available in the opposing (major) traffic stream. The Follow-up Headway (seconds) is a saturation (queue discharge) headway, and the corresponding saturation flow rate (vehicles per hour) in gap acceptance analysis is 3600 / Follow-up Headway. See Critical Gap (Headway), Gap Acceptance, Saturation Flow Rate.

A model that estimates traffic fuel consumption or emisson using vehicle path (drive cycle) data consisting of a series of cruise, acceleration, deceleration and idling (stopped) time elements for specific traffic conditions represented by intersection geometry, traffic control and demand flows. Also referred to as the modal model. The model uses speed, accelaration distance, acceleration time, acceleration rate and grade as traffic and road parameters. See Acceleration Model, Emission Model, Fuel Consumption Model, Instantaneous Model, Operating Cost Model, Vehicle Parameters.

The distance representing the number of vehicles that can queue away from a shared lane without interrupting the flow of the other movements sharing the lane. This parameter is used to determine the capacity of shared lanes at signalised intersections where different movements in a shared lane can block each other at different times during the signal cycle because of different timing and movement characteristics.

The uninterrupted traffic speed when density is approximately zero, i.e. when only few vehicles are present in the traffic stream. See Congestion Coeefficient, Desired Speed, Space-Mean Speed, Speed, Speed Efficiency, Time-Mean Speed.

A divided highway with no access for traffic between interchanges and with grade separation at all intersections (interchanges).

A model to estimate fuel consumption of vehicles using a traffic facility. See Emission Model, Four-Mode Elemental Model, Instantaneous Model, Operating Cost Model, Vehicle Parameters.

The ratio of the resource price of fuel (the wholesale price plus retail margin less taxes) to the pump price used to calculate the resource cost of fuel. See Operating Cost.

Control of a turning movement using three-aspect (red, yellow, green) turn arrows on a six-aspect signal face, where the green arrow indicates that the vehicle can turn unopposed (with no opposing vehicle or pedestrian traffic) and the red arrow indicates that the vehicle is not permitted to turn (filter turns not permitted).

1. A pedestrian crossing where pedestrians cross the road in a single stage. See Signalised Crossing, Pedestrian Crossing, Staged Pedestrian Crossing, Staged Signalised Pedestrian Crossing. 2. A gap acceptance process at a two-way sign-controlled (TWSC) intersection where for minor-street through and turning movements use gaps in the major road traffic stream in a single stage. See Staged Crossing (Two-Way Sign Control), Two-Way Sign-Control (TWSC).

G

The process by which an opposed (minor) stream vehicle accepts an available gap in the opposing (major) stream for entering (departing from queue or merging). See Critical Gap (Headway), Follow-up Headway.

Capacity of a movement subject to a gap acceptance process (opposed movement). See Capacity, Gap Acceptance, Critical Gap (Headway), Follow-up Headway, Opposed Movement.

A cycle consisting of a block period with no acceptable gap and an unblock period with an acceptable gap during a gap acceptance process. See Block and Unblock Periods.

A factor used to adjust the critical gap and follow-up headway parameters of a movement subject to a gap acceptance process (opposed movement) to allow for the effect of its turning characteristics and movement class on gap acceptance capacity. See Critical Gap (Headway), Follow-up Headway, Gap Acceptance, Movement Class, Opposed Movement, Opposing Movement, Opposing Vehicle Factor.

See Space Length.

An actuated signal controller setting equivalent to the maximum value of gap (space time measured by the detector between successive vehicles) that can extend the green interval subject to a maximum green time setting. The gap setting is a space time value (headway time less detector occupancy time). Also referred to as vehicle interval, extension interval, extension, or unit extension. See Actuated Signal Data, Effective Detection Zone Length, Maximum Green Time, Minimum Green Time, Occupancy Time, Space Time.

Delay due to physical and basic traffic control factors as experienced by a vehicle that negotiates the intersection in the absence of any other vehicles (decelerates from the approach cruise speed down to an approach negotiation speed, travels at that speed, accelerates to an exit negotiation speed, and travels at exit negotiation speed until clearing the intersection negotiation area). See Control Delay, Delay.

The effective value of a slow-down and speed-up manoeuvre associated with Geometric Delay, which is measured in terms of equivalent Major Stops. See Effective Stop Rate.

An instruction to a road user to remain stationary until it is safe to proceed if road user is stopped, or to slow down and, if necessary, stop and give way (yield) to all Opposing Movements.

A broken or solid line marked across all or part of a road, behind which vehicles should slow down and give way (yield) to all Opposing Movements. See Stop Line.

The rate of longitudinal rise or fall of a road with respect to the horizontal (tangent of the angle of road surface to the horizontal), expressed as a percentage.

An intersection where roads with conflicting traffic movements are separated vertically, e.g. using overpasses or underpasses. See At-Grade Intersection, Interchange.

The signal control interval when a green display is shown (starting after the all-red interval of the previous phase and finishing before the yellow interval of the subject phase). See All-Red Interval, Displayed Green and Red Times, Effective Green and Red Times, Yellow Inteval.

The signal timing method used for the allocation of longer green times to movements assigned high priority for green splits, usually coordinated movements (platoons) in networks with a coordination (network) cycle time, while keeping other movements at their practical (target) degree of saturation levels. See Coordination, Practical Degree of Saturation, Progression, Platoon.

See Phase Start Time.

Duration of the green interval for a phase or a movement. See Displayed Green and Red Times, Effective Green and Red Times.

The ratio of the effective green time to the cycle time.

The use of uniform or compound growth rates for vehicle and pedestrian demand volumes in design life analysis. See Design Life Analysis.

The annual rate of increase in vehicle and pedestrian demand volumes. See Design Life Analysis.

H

The time between passage of the front ends of two successive vehicles. See Spacing.

Any vehicle with more than two axles or with dual tyres on the rear axle (buses, trucks, semi-trailers (articulated vehicles), cars towing trailers or caravans, tractors and other slow-moving vehicles). All other vehicles are defined as Light Vehicles (cars, vans, sport utility vehicles, small trucks, motorcycles, bicycles). See Light Vehicle, Passenger Car.

A slip (bypass) lane with a high-angle design likely to be used by a movement controlled by give way (yield) sign or stop sign. See Low-Angle Lane, Lane Type, , Slip (Bypass) Lane.

A parameter used to convert the hourly values of performance statistics to Annual Values.

I

The stopped condition of a vehicle (at zero or near-zero speed).

Rate of fuel consumption or emission while the vehicle is stopped (at zero or near-zerospeed).

The rate of midblock flow entering the internal approach of a network determined as the difference between the upstream and downstream total demand flow rates. Inflow occurs when the upstream demand flow rate is lower than the downstream demand flow rate. See Outflow Rate.

See Minimum Green Time.

The diameter of the outer roundabout circle measured for each entry (approach) along a line drawn from the middle of the give-way (yield) line of the subject roundabout entry (approach) through the centre of the roundabout island to the give-way (yield) line of the entry (approach) on the opposite side of the roundabout.

A model that estimates second-by-second values of traffic fuel consumption or emisson. See Emission Model, Four-Mode Elemental Model, Fuel Consumption Model, Operating Cost Model, Vehicle Parameters.

A system of interconnecting roads that provide for grade-separated traffic movements (a grade-separated. See At-Grade Intersection, Grade-Separated Intersection.

The signal control interval between the end of the green display for a phase (or a movement) and the start of the green display for the next phase (or a conflicting movement), consisting of the yellow interval and all-red interval. See All-Red Interval, Starting Intergreen Interval, Terminating Intergreen Interval, Yellow Interval.

The duration of the intergreen interval, which is the sum of the yellow time and the all-red time. See All-Red Time, Yellow Time.

The condition of a traffic stream affected by traffic control devices including traffic signals, roundabouts, give-way (yield) or stop signs, or other causes of periodic delay or interruption including an intersecting traffic stream having priority, pedestrian crossings, trams, light rail and railway crossings. See Uninterrupted Flow.

A place where two or more roadways cross or meet where right-of-way is typically regulated through the use of traffic control devices (traffic signals, give-way / yield and stop signs) or by grade separation. See Alternative Intersections and Interchanges, At-Grade Intersection, Grade-Separated Intersection, Interchange.

See Negotiation Area.

The average headway between vehicles in a moving queue. This is used as a minimum headway in defining moving queues (bunches) of vehicles for the purpose of modelling the headway distribution of vehicles.

A raised or painted area between traffic lanes for control of vehicle movements (strip island, triangular island, and so on). See Central Island, Splitter Island.

The diameter of the Central Island including the truck apron measured for each roundabout entry (approach).

J

See Queue Space.

K

A raised border of rigid material formed at the edge of a carriageway or pavement to separate elements of the road (carriageway, sidewalk, islands).

L

An arrow-controlled right turn / left turn movement that is started and terminated in the phase that immediately follows the phase in which the opposing through movement runs.

A portion of the carriageway allocated for the use of a single line of vehicles.

See Blockage Calibration Factor.

See Midblock Lane Change.

A term used to describe whether an approach or exit lane at an intersection is a is a full-length lane, short lane (turn bay or short lane due to parking) or two-segment lane. More generally, lane configuration data also include the lane type, lane control, lane length and width, grade, data for adjacent islands. For short lanes and two-segment lanes, the lane configuration data include the overflow or merging lane, short lane length and segment length. See Short Lane, Two-Segment Lane.

The type of traffic control (signals, give way / yield, stop, continuous /uninterrupted) that applies to an approach lane.

The OD movements and movement classes that are allocated to a lane. See Exclusive Lane, Movement, Movement Class, Shared Lane.

An organization of approach lanes at an intersection designated for separate analysis as required by models that are not lane based (e.g. the US Highway Capacity Manual method). A separate lane group is established for each set of lanes allocated to a vehicle movement exclusively and for each set of lanes with one or more lanes shared by several vehicle movements. See Movement Group.

The length of a lane between two intersections (excluding the intersection negotiation area) for a full-length lane, or the length of a short lane. See Negotiation Area, Short Lane.

An organization of vehicle movements at an intersection used by lane-based models for network analysis purposes. For each movement on each approach (by origin - destination and by movement class), a separate lane movement is established for vehicles moving from each approach lane to each exit lane on each exit road. See Movement, Movement Class.

Proportions of a lane movement flow from a given approach lane exiting to available exit lanes on a given exit road. Different flow proportions can be specified for different Movement Classes. See Movement, Lane Movement, Movement Class.

See Segment.

A term used to describe whether an approach lane at an intersection is a normal lane or a slip / bypass lane. See High-Angle Lane, Low-Angle Lane, Slip / BypassLane.

The distribution of vehicles among lanes when two or more lanes are available for a movement.

Ratio of the lane degree of saturation to the highest (critical) lane degree of saturation in a set of lanes.

A lane-by-lane mathematical model of a road (traffic) network as well as the intersections, pedestrian crossings, other points of interruption and the connecting roads that form the network, including lane-by-lane input and output. See Link-Based Model, Network.

The phase interval used at the start of a phase to delay the introduction of green interval for some movements in the same phase. See Early Cut-Off.

An arrow-controlled right turn / left turn movement that is started and terminated in the phase that immediately precedes the phase in which the opposing through movement runs.

A term used to describe whether an intersection leg is a two-way road, a one-way approach or a one-way exit. See Lane Configuration.

An index of the operational performance of traffic on a given roadway, traffic lane, approach, intersection, route or network, based on measures such as delay, degree of saturation, density, speed, congestion coefficient, speed efficiency or travel time index during a given flow period. This provides a quantitative stratification of a performance measure or measures that represent quality of service, measured on an A to F scale, with LOS A representing the best operating conditions from the traveler’s perspective and LOS F the worst. See Network Level of Service, Performance Measure, Route Level of Service.

All vehicles that are not classified as a Heavy Vehicle including passenger cars, vans vehicles, minibuses, four-wheeled pickup trucks, and so on, as well as motorcycles and bicycles. See Passenger Car, Heavy Vehicle.

See Priority Reversal.

A mathematical model of a road (traffic) network formed using nodes to describe intersections, pedestrian crossings and other points of interruption to traffic flows, and links to describe their connections. See Lane-Based Model, Network.

The amount of time in a signal cycle which is effectively lost to a traffic movement because of starting delays (starting intergreen time and start loss) less the end gain time due to additional departures after the end of green interval. See End Gain, Intergreen Time, Start Loss, Starting Intergreen Time, Terminating Intergreen Time.

A slip (bypass) lane with a low-angle design likely to be used by an uninterrupted (continuous) movement or a movement controlled by traffic signals. See High-Angle Lane, Lane Type, Slip (Bypass) Lane.

See Turn On Red.

M

A road on which traffic takes precedence over all entering or crossing traffic at an unsignalised (sign controlled) intersection. See Two-Way Sign Control (TWSC).

A drive cycle element that involves a deceleration from the approach cruise speed to zero speed and an acceleration from zero speed to the exit cruise speed. See Effective Stop Rate, Proportion Queued.

The average vehicle mass value per movement class used in fuel consumption, emission and vehicle operating cost calculations. Gross vehicle mass means the maximum loaded mass of a vehicle. Unloaded mass means the mass of a vehicle in running order, equipped with all standard equipment and with all fuel and other fluid reservoirs filled to nominal capacity, but unoccupied and without any other load. See Maximum Power.

The largest value of cycle time to be used in signal timing calculations or in signal control.

The largest value of green time to be used in signal timing calculations or in signal control. Also referred to as the maximum running time. In actuated signal control, this is the sum of Minimum Green Time and Maximum Green Extension Time. See Actuated Signal Data, Gap Setting, Minimum Green Time.

The maximum vehicle power value per movement class used in fuel consumption, emission and vehicle operating cost calculations. See Mass.

See Maximum Green Time.

The approach with signals to control traffic at a roundabout with metering signals. This is the approach causing problems for a downstream approach without roundabout metering signals. See Controlling Approach, Roundabout Metering Signals.

A section of road between intersections.

See Inflow Rate.

Lane changes made by vehicles between intersections that are related to differences between upstream and downstream lane flow rates.

See Outflow Rate.

The minimum value of the Clearance Time.

The smallest value of cycle time to be used in signal timing calculations or in signal control.

The minimum number of departures per lane per minute representing minimum capacity for opposed turns at unsignalised intersections (roundabouts and two-way sign-controlled intersections), similar to the number of departures after the end of the displayed green interval at signalised intersections. See End Departures.

The smallest value of green time to be used in signal timing calculations or in signal control. The duration of the interval in traffic-actuated signals during which the green display cannot be terminated. Also referred to as the initial running time. See Actuated Signal Data, Gap Setting, Maximum Green Time.

The minimum value of the duration of the walk display for pedestrians at a signalised intersection or a midblock signalised pedestrian crossing.

A system used to group vehicles into aggregate movement groups including light vehicles, heavy vehicles, buses, bicycles, large trucks, light rail or trams). This is related to but different from vehicle classification. See Lane Movement, Light Vehicle, Heavy Vehicle, Movement, Traffic Composition, User Class.

An organization of vehicle movements at an intersection as required by models based on lane groups, i.e. models that are not lane based (e.g. the US Highway Capacity Manual method). A separate movement group is established for each movement allocated to one or more exclusive lanes and a set of movements allocated to one or more shared lanes. See Lane Group, Movement, Movement Class.

A traffic stream identified by its origin (approach) and destination (exit) at an intersection. Also referred to as an OD (Origin - Destination) Movement or Turning Movement. See Lane Movements, Movement Class.

N

The controlled area of the intersection outside the approach road and exit road areas where conflicting movements travel. See Approach Distance, Downstream Distance, Exit Distance, Negotiation Distance.

The vehicle distance travelled from the approach stop line (give-way / yield line) to the end of the intersection negotiation area for a given OD (turning or through) movement by movement class. See Approach Distance, Downstream Distance, Exit Distance, Negotiation Area, Negotiation Radius.

The radius of the vehicle path during travel in the intersection negotiation area for a given OD (turning or through) movement by movement class. See Negotiation Area, Negotiation Distance, Negotiation Speed, Turn Radius.

The safe speed of a vehicle moving through the controlled area of the intersection (negotiation area) for a given OD (turning or through) movement by movement class. For turning vehicles, this can be determined as a function of the negotiation radius. See Negotiation Area, Negotiation Distance, Negotiation Radius.

Setting up a network by defining its elements and their connections.

The cycle time that is used as a common cycle time for signal coordination purposes to apply to all coordinated signalised intersections and pedestrian crossings in a network. See Cycle Time, Network.

A term used in relation to the consistency of upstream and downstream demand flow rates on internal approaches of a network as determined in relation to midblock inflow and outflow rates. See Inflow Rate, Outflow Rates.

An aggregate level of service measure used for assessing traffic conditions in a network as a whole, usually based on the speed efficiency parameter as a simple measure. See Level of Service (LOS), Route Level of Service.

A lane-based or link-based mathematical model of a road (traffic) network for estimating its performance considering interactions of traffic among its elements including backward spread of congestion (queue spillback), capacity constraint to oversaturated upstream lanes limiting the flows entering downstream lanes, forward movement of signal platoons formed at signalised intersections midblock lane changes, and so on. See Capacity Constraint, Lane-Based Model, LinkBased model, Network, Route, Performance Measure, Platoon, Queue Spillback.

A measure of variations in performance measures during network model iterations indicating how well the results are settled when the iterations are stopped. This could be interpreted as an indicator of the certainty (or uncertainty) of the network analysis results. See Percentage Stopping Condition.

A system of intersections, pedestrian crossings and other points (nodes) of interruption to traffic flows and the roads (links) that connect them. See Network Model.

O

The time that starts when the front of a vehicle enters the detection zone and finishes when the back of the vehicle exits the detection zone, i.e. the duration of the period when the detection zone is occupied by a vehicle.  See Gap Setting, Space Occupancy Ratio, Space Time, Time Occupancy Ratio.

See Movement.

The time interval that has low vehicle and pedestrian traffic demand flows during the day (24-hour period). See Analysis Period, Flow Period, Peak Period, Peaking Parameters, Total Flow Period.

The method used for determining signal offset, including start of green offset (leading offset, starting offset), end of green offset (trailing offset), middle of green, and simultaneous (zero offset). See Offset, Relative Offset.

The time difference between the phase change time or green start time of the reference phase at the subject site or common control group (CCG) relative to the phase change time or green start time of the reference phase at the reference site or common control group (CCG). Thus, offsets at all sites or common control groups (CCGs) in a coordinated control system are relative to the reference Site or common control group (CCG). See Phase Change Time, Green Start Time, Reference Phase, Relative Offset.

Traffic operation cost associated with vehicle and pedestrian movements, and consisting of vehicle operating cost and time cost components where time cost applies to vehicle occupants (persons) and pedestrians. See Time Cost, Vehicle Operating Cost.

A model to estimate the operating cost that consists of vehicle operating cost and time cost of vehicle occupants (persons) and pedestrians. See Fuel Consumption Model.

A movement (Filter Turn, Permitted Turn, Minor Movement) that gives way (yields) to one or more opposing traffic streams at a signalised or unsignalised intersection.

A movement that conflicts with, and has priority over, another (opposed) movement.

A factor to adjust the opposing pedestrian flow rate, for example to include the effect of some pedestrians giving way / yielding to vehicles in gap acceptance modelling of a vehicle movement opposed by pedestrian movement.

A factor used to determine the opposing flow rate in pcu/h for a movement subject to gap acceptance process (opposed movement) to allow for the effect of each movement class in the opposing stream (circulating flow at roundabouts) on gap acceptance capacity of the opposed movement. See Gap Acceptance, Gap Acceptance Factor, Movement Class, Opposed Movement, Opposing Movement.

A cycle time that optimises (minimises or maximises) a selected performance measure (e.g. minimises delay) for an intersection or network.

Maximum Green Settings that optimise (minimise or maximise) a selected performance measure (e.g. minimises delay) for an intersection controlled by vehicle-actuated signals.

See Movement (Traffic Movement).

The rate of midblock flow leaving the internal approach of a network determined as the difference between the upstream and downstream total demand flow rates. Outflow occurs when the upstream demand flow rate is greater than the downstream demand flow rate. See Inflow Rate.

An interrupted traffic condition when a number of queued vehicles are not able to depart due to insufficient capacity during a traffic signal or gap acceptance cycle (also known as cycle failure). See Cycle, Gap Acceptance Cycle, Overflow Queue.

The number of queued vehicles per cycle left over at the end of a green period at signals or at the end of acceptable gap (unblock) periods during a gap acceptance process. See Cycle Failure.

A movement that runs in several consecutive phases without stopping during the associated intergreen period(s). See Phase Transition.

Traffic flow conditions where the Demand Flow Rate exceeds Capacity (Degree of Saturation is greater than 1.0).

P

A term used to refer to closely-spaced intersections and interchanges with limited queue storage space on internal approaches, including staggered T intersections, freeway signalised diamond interchanges, freeway roundabout interchanges, diverging diamond interchanges (signalised), fully-signalised roundabouts (including signalised circulating roads), large signalised intersections with wide median storage areas, staged crossings at sign-controlled intersections, pedestrian crossings near intersections, and various alternative intersection and interchange arrangements that can be modelled as a small network. Signalised paired intersections are likely to operate as a common control group (CCG), i.e. under a single signal controller. See Common Control Group (CCG), Intersection, Pedestrian Crossing, Network.

A signalised pedestrian movement that runs at the same time as the parallel vehicle movement (s) that are controlled by circular green displays.

The number of parking manoeuvres per hour used for calculating a saturation flow reduction factor to allow for friction due to parking manoeuvres in an adjacent parking lane at signalised intersections.

See Gap Setting.

For the purpose of general traffic analysis requirements, this term refers to vehicles manufactured primarily for the purpose of carrying passengers including sedans, taxi cabs, station wagons, sports utility vehicles, and excludes other types of light vehicles such as bicycles, motor cycles, campers, motor homes, ambulances, minibuses and light commercial vehicles such as utility vehicles, panel vans and pickup trucks. See Light Vehicle, Heavy Vehicle..

A factor used to determine the saturation flow rate of a movement at signals to allow for the effect of each movement class in the traffic stream (passenger cars per vehicle). This factor is determined using relative saturation (queue discharge) headway values of different movement classes under identical road, traffic and control conditions.. Also referred to as passenger car unit (PCU). See Basic Saturation Flow Rate, Movement, Movement Class, Saturation Flow Rate, Saturation Headway, Through Car Equivalent.

See Passenger Car Equivalent (PCE).

The ratio of the average flow rate during the total flow period to the average flow rate during the peak flow period (e.g. the 30-minute peak flow interval during the peak hour). The peak flow factor is equivalent to peak hour factor when the total flow period is 60 minutes. See Peak Flow Period, Peak Hour, Peak Hour Factor, Total Flow Period.

The 60-minute interval that has the highest traffic demand flows. Usually AM peak hour and PM peak hour are considered for analysis because of the likelihood of significant differences in the directional flows during morning and evening hours. See Analysis Period, Flow Period, Off-Peak Period, Peaking Parameters, Total Flow Period.

The ratio of the average flow rate during the peak hour to the average flow rate during the peak flow period (e.g. the 15-minute peak flow interval during the peak hour). The peak hour factor is a special case of peak flow factor for the total flow period of 60 minutes. See Peak Flow Factor, Peak Flow Period, Peak Hour, Total Flow Period.

The time interval that has the highest traffic demand flows during the day (24-hour period), e.g. AM and PM peak periods, or peak hour period, peak 15-minute period, and so on. See Analysis Period, Flow Period, Off-Peak Period, Peaking Parameters, Total Flow Period.

The duration of the peak flow period to the duration of the total flow period. See Peak Flow Period, Total Flow Period.

The collective name given to the Peak Flow Period, Peak Flow Factor (or Peak Hour Factor) and Total Flow Period parameters that define a typical peaking pattern for the analysis period.

The method used in signal timing, capacity and performance analysis to account for the effect of occasional pedestrian calls when pedestrian volumes are low, reducing the probability of pedestrian arrivals during the average signal cycle. See Phase Actuation.

The Flashing Don't Walk period that immediately follows the termination of pedestrian walk display to enable pedestrians, who have just stepped off the kerb at the commencement of this period, to complete their crossing to the nearest kerb or refuge. See Clearance 1 Interval, Clearance 2 Interval (Clearance Time Overlap), Pedestrian Minimum Time, Walk Time.

A specially marked area giving legal rights to pedestrians crossing the road (signalised crossing, zebra crossing, pelican crossing, puffin crossing, and so on). See Crossing, Full Crossing, Zebra Crossing.

Minimum time required for both Walk and Flashing Don't Walk displays, but excluding any overlaps with terminating intergreen displays. See Clearance 1 Interval, Clearance 2 Interval (Clearance Time Overlap), Pedestrian Clearance Period, Walk Time.

See Arrivals During Green.

A parameter used in iterative approximation methods to specify the maximum percentage variation allowed in selected performance measures before the iterations are stopped. See Network Model Variability.

A value below which a specified percentage of the queue length values observed for individual signal cycle or gap-acceptance cycles fall. For example, the 95th percentile queue length is the value below which 95 per cent of all observed queue lengths fall, or 5 per cent of all observed queue lengths exceed. See Back of Queue, Queue at the Start of Green, Cycle-Average Queue, Queue, Queue Distance, Queue Move-up.

A measure that combines several performance measures such as delay, number of stops and queue length.

A quantitative or qualitative measure such as delay, queue length, stop rate, average travel time, speed efficiency, and so on used to evaluate the operational characteristics of a traffic facility at different levels of detail (lane, movement, approach, intersection, route, network). See Level of Service.

See Opposed Movement.

That part of a signal cycle during which one or more movements receive right of way subject to resolution of any vehicle or pedestrian conflicts by priority rules. A phase is identified by at least one movement gaining right of way at the start of it and at least one movement losing right of way at the end of it.

The method used in signal timing, capacity and performance analysis to account for the effect of phase skipping when vehicle demand volumes are low, resulting in a phase frequency less than 100%. See Pedestrian Actuation, Phase Frequency.

The time when the subject phase is initiated, which is the time when the displayed green interval ends (yellow interval starts) for the conflicting movement phase which precedes the subject phase. See Displayed Green and End Times, Phase Start Time.

The percentage of signal cycles when signal phase is called during an analysis (flow) period.

The order of phases in a signal cycle. See Variable Phase Sequence.

The duration of each phase (Green Time and Intergreen Time) within a signal cycle. It is normally expressed as a percentage of cycle length.

The time when the displayed green interval starts for the subject phase, which is the time when the all-red interval ends for the conflicting movement phase which precedes the subject phase. See All-Red Interval, Displayed Green and End Times, Phase Change Time.

The duration of the displayed green interval plus the terminating intergreen interval (sum of displayed phase green time, yellow time and all-red time). See All-Red Time, Green Time, Terminating Intergreen Time, Yellow Time.

A term used in signal timing analysis to describe the condition when a turning movement is stopped at the end of the current signal phase before starting in the next phase, as opposed to an overlap movement that can run in two consecutive phases without stopping and starting. See Overlap Movement.

A closely spaced group of vehicles or pedestrians travelling together as a moving queue (with small spacing and headways, and at substantially the same speed) because of signal control, geometric conditions or other factors. See Arrivals During Green, Arrival Type, Bunching, Coordination, Offset, Platoon Ratio, Progression, Progression Factor.

The degradation of a platoon, i.e. increasing spacing and headways with increasing distance travelled along an urban street after the platoon forms at a signalised intersection and departure during the green period, due to differing speeds of vehicles within the platoon.

The ratio of the average arrival flow rate during the green period to the average arrival flow rate during the signal cycle, equivalent to the ratio of the proportion of traffic arriving during green (arrivals during green) to the green time ratio. For isolated signals (no signal coordination effects), the Platoon Ratio is 1.0. This corresponds to uniform arrivals during the red and green periods. Values of Platoon Ratio greater than 1.0 indicate good progression effects, and the values of Platoon Ratio smaller than 1.0 indicate poor progression effects. See Arrivals During Green, Arrival Type, Coordination, Offset, Platoon, Progression, Progression Factor.

The maximum flow rate at a target (practical) degree of saturation (usually 80% to 90%). See Capacity, Degree of Saturation.

A cycle time and the associated green times calculated to satisfy the practical (target) degrees of saturation (usually 90 per cent) for critical movements. This method results in equal degrees of saturation (EQUISAT method) for critical movements except those affected by minimum or maximum green time constraints (especially in the case of large pedestrian minimum times), by the use of unequal target degrees of saturation, or by application of the green split priority method for coordinated movements. See EQUISAT Method, Green Time, Green Split Priority, Phase Time, Practical Degree of Saturation.

A target, or maximum, degree of saturation that corresponds to an acceptable level of traffic performance.

The amount of increase possible in the arrival flow rate to obtain a degree of saturation equal to the practical (target) degree of saturation.

The interruption of normal traffic signal operations to serve a preferred vehicle. See Bus Priority.

See Fixed-Time Signal Analysis.

The priority rules determining Opposed Movements and Opposing Movements at an intersection.

A condition in a gap acceptance process (roundabout entry, minor road at sign control, filter turns at signals, merging) where the opposing (higher priority) movement adjusts, or is forced to adjust, its headways allowing opposed vehicles to enter or cross using smaller gaps in opposing traffic.

See Major Road.

A traffic regulation which assigns priority to one stream of traffic over another. See Filter Turn, Opposed Movement, Opposing Movement.

The probability of the back of a queue from a downstream intersection lane extending beyond the available queue storage length (lane length) and blocking traffic movements at upstream intersection lanes. See Blockage, Blockage Tolerance, Blockage Calibration Factor, Queue Spillback.

A time relationship between adjacent traffic signals which allows vehicle platoons to be given a green signal as they pass through the sequence of intersections. See Arrivals During Green, Arrival Type, Coordination, Offsett, Platoon, Platoon Ratio, Progression Factor.

A parameter used in determining signal coordination effect on delay, queue length, stop rate, and so on relative to isolated (non-coordinated) operation. See Arrivals During Green, Arrival Type, Coordination, Offset, Platoon, Platoon Ratio, Progression.

The proportion of traffic that is queued as related to the major stops or slow downs from the approach cruise speed due to the effects of traffic control and the existence of other vehicles. The highest value of proportion queued is 1.0 (all vehicles or pedestrians queued). See Effective Stop Rate, Major Stop, Queue Move-up, Slow Down.

Q

A line of vehicles or pedestrians waiting to proceed through an intersection, pedestrian crossing or other point of interruption, measured in vehicles or pedestrians, or as a queue distance in metres or feet. Slowly moving vehicles or pedestrians joining the back of the queue are usually considered part of the queue. The internal queue dynamics can involve starts and stops referred to as queue move-ups. A faster-moving line of vehicles is often referred to as a moving queue or a platoon. See Back of Queue, Queue at the Start of Green, Cycle-Average Queue, Percentile Queue, Platoon, Queue Distance, Queue Move-up.

The extent of the queue of vehicles in a lane at a signalised intersection or crossing as measured at the start of the green period relative to the stop line.

A restriction applied to the upstream flow that can enter an internal approach lane in a network when the average back of queue equals the storage space so that any further vehicles queue within the upstream area. See Queue Storage Distance.

The distance between the advanced queue detectors and the roundabout give-way /yield line on the controlling approach of a roundabout with metering signals. See Controlling Approach, Metered Approach, Roundabout Metering Signals.

The departure of vehicles from a queue.

The queue length expressed as a distance value (metres or feet) rather than as the number of vehicles or pedestrians in the queue. See Back of Queue, Queue at the Start of Green, Cycle-Average Queue, Percentile Queue, Queue Distance, Queue Move-up.

A manoeuvre by a queued vehicle that accelerates towards the queue discharge speed, travels at that speed and decelerates to a stop because of insufficient capacity during the signal cycle or gap acceptance cycle at an intersection. See Cycle, Gap Acceptance Cycle, Overflow Queue, Cycle Failure.

The distance between the front ends of two successive queued vehicles in the same traffic lane. See Spacing.

A condition in road networks where the back of a queue from a downstream intersection lane extends beyond the available queue storage length (lane length), resulting in potential blockage of traffic movements at upstream intersection lanes and capacity losses at upstream intersection lanes. See Blockage, Blockage Calibration Factor, Blockage Tolerance, Probability of Blockage.

The length of the approach lane where vehicles can queue.

The ratio of the back of queue distance to the available queue storage distance on the subject lane.

The forming of a line of delayed vehicles.

The part of the Stopline Delay that includes the stopped delay (while vehicle is idling at near-zero speed) and the queue move-up delay (while a queued vehicle accelerates and travels towards the stop-line but stops again, e.g. because the signal display changes to red). See Control Delay, Geometric Delay, Idling, Queue Move-up, Stop-Line Delay.

R

A simple factor used to convert the cost of fuel to total vehicle running cost including tyre, oil, repair and maintenance. See Operating Cost.

See All-Red Interval.

The duration of the red signal display for a phase or a movement.

A signal phase in the phase sequence of a site or common control group (CCG) used as the reference point for assigning an offset value to the site or common control group (CCG) for signal coordination purposes. The signal offset applies to the reference phase and the phase change times of other phases in the sequence are determined relative to the change time of the reference phase. See Common Control Group (CCG), Coordination, Offset, Network, Phase Change Time, Reference Site or CCG, Site.

An individual site or common control group (CCG) used as the reference point for assigning signal offsets in a coordinated signal system. The offset value of the reference site or CCG is zero. See Common Control Group (CCG), Coordination, Network, Offset, Site.

The time difference between the start time of a movement green period at the downstream site or common control group (CCG) relative to the start time of a movement green period at the upstream site or common control group (CCG). The green period in this definition could be the displayed green period or the effective green period depending on the purpose of use of this parameter. See Effective Green and Red Times, Offset.

The degree to which the result of a measurement, calculation, or specification can be depended on to be accurate. See Uncertainty.

See Network.

An intersection with a generally circular shape, characterized by give way (yield) on entry and circulation around a central island.

A signal control system used at roundabouts to create gaps in the circulating stream in order to help with the problem of excessive queuing and delays at approaches affected by highly directional (unbalanced) flows. Roundabout metering signals are installed on selected roundabout approaches and used on a part-time basis since they are usually required only when heavy demand conditions occur during peak periods. The term metered approach is used for the approach stopped by red signals (approach causing problems for a downstream approach), and the term controlling approach is used for the approach with the queue detector, which is the approach helped by the metering signals. See Controlling Approach, Metered Approach..

A series of movements in one direction of travel in a network. See Movement, Network.

The process of defining a route by selecting a series of movements in one direction of travel in a network. See Movement, Network, Route.

An aggregate level of service measure used for assessing traffic conditions for a route, usually based on the speed efficiency parameter as a simple measure. See Level of Service (LOS), Network Level of Service.

See Turn On Red.

The average speed including the effect of delays due to interrupted conditions but not including any stopped (idling) times. See Average Travel Speed, Cruise Speed, Free-Flow Speed, Negotiation Speed, Uninterrupted Travel Speed.

S

The steady departure (queue discharge) flow rate achieved by vehicles departing from the queue during the green period at traffic signals as measured at the stopline. Saturation flow rate (vehicles per hour) is 3600 / saturation flow headway (seconds). See See Basic Saturation Flow Rate, Follow-up Headway, Movement, Movement Class, Passenger Car Equivalent, Saturation Headway, SCATS Maximum Flow (MF), Through Car Equivalent.

The steady departure (queue discharge) headway achieved by vehicles departing from the queue during the green period at traffic signals as measured at the stopline. Saturation headway (seconds) is 3600 / saturation flow rate (vehicles per hour). The follow-up headway parameter used in gap acceptance analysis is a saturation headway. See Follow-up Headway, Saturation Flow Rate, SCATS Maximum Flow (MF).

The saturated part of the green period at signals. This is the initial part of the green period when the queue discharges at the saturation flow rate. See Saturation Flow Rate.

The steady departure (queue discharge) speed achieved by vehicles departing from the queue during the green period at traffic signals as measured at the stopline. See Saturation Flow Rate, Saturation Headway.

A fully-adaptive wide area control system developed in Australia (Sydney Coordinated Adaptive Traffic System) and used in many cities around the world, incorporating coordinated and isolated signal control algorithms.

The degree of saturation in the SCATS adaptive control method.

The SCATS adaptive control method for a single (isolated) signalised intersection.

The fully-adaptive coordinated signal control mode of operation of the SCATS control system.

A maximum departure flow rate during a fully saturated green period averaged over the green and intergreen times as a special measure of saturation flow rate. See Saturation Flow Rate.

An exclusive pedestrian phase at an intersection where pedestrians are allowed to cross in any direction including diagonally within the limits of the crosswalk lines. See Diagonal Crossing, Exclusive Pedestrian Phase.

The section of a lane, or a section of road, in the direction of travel with different traffic characteristics. See Two-Segment Lane.

A method for assessing how model outputs change in response to changes in model inputs, implemented by varying one input at a time over its reasonable range while holding all other inputs constant. For example, this technique can be used to investigate changes in estimates of capacity and performance measures as a function of parameters representing driver behaviour and traffic characteristics (critical gap, follow-up headway, basic saturation flow, lane utilisation ratio, cruise speed, vehicle queue space), and geometry (lane width, and roundabout parameters including inscribed diameter, entry angle and entry radius).

See Phase Sequence.

A lane allocated for use by two or more OD movements or movement classes, e.g. shared through and right-turn lane, as opposed to an exclusive lane. See Lane Discipline, Movement, Movement Class, Exclusive Lane.

A lane of limited length relative to other lanes on the approach or exit side of an intersection, e.g. a turn bay or part of a lane available downstream of vehicles parked on an approach, or a lane terminated on the exit side of the intersection forcing vehicles to merge into the adjacent lane.

The method used in signal timing calculations corresponding to the particular signal control method directly or indirectly. See Fixed-Time/Pretimed Signal Analysis, Actuated Signal Analysis.

A single optical system (circular, arrow, or symbolic) on a signal face capable of being illuminated at a given time. Red, yellow, green and white signal aspects are used for vehicle movements, and walk and don't walk signal aspects are used for pedestrians. See Traffic Signal, Traffic Signal Controller.

See Traffic Signal Controller.

See Coordination.

See Offset.

See Offset Method.

The sequential arrangement of separately controlled groups of vehicle and pedestrian movements within a signal cycle to allow all vehicle and pedestrian movements to proceed.

The process of determining the durations of green, yellow and red displays, actuated signal control settings, as well as offsets for coordinated signals.

An area of the road used by pedestrians when crossing the road with the guidance of pedestrian signals at a midblock or intersection location. It can be used by cyclists if bicycle signals are provided. See Full Crossing, Staged Pedestrian Crossing, Staged Signalised Pedestrian Crossing.

An intersection where vehicle and pedestrian movements are controlled by traffic signals. See Traffic Signal.

A model that use various rules (mostly in the form of mathematical equations) for movement of vehicles in a traffic system (individually or in platoons). Depending on the degree to which the movements of individual vehicles are aggregated, a simulation model can be microscopic, mesoscopic or macroscopic. See Analytical Model.

A term used for an intersection, pedestrian crossing, or other interruption point modelled separately or as an element of a network, including elements of a paired intersection, common control group, or interchange. See At-Grade Intersection, Common Control Group, Grade-Separated Intersection, Interchange, Intersection, Paired Intersection, Site.

A slip (bypass) lane is a high-angle or low-angle turning (or through) movement lane separated from an adjacent lane by a triangular or strip island. See Lane Type, High-Angle Lane, Low-Angle Lane.

A drive cycle element that involves a deceleration from the approach cruise speed to a non-zero intermediate speed and an acceleration from the intermediate speed to the exit cruise speed. Effective Stop Rate, Major Stop, Proportion Queued, Queue Move-up.

See End Departures.

The following distance between two successive vehicles as measured between the rear end of one vehicle and the front end of the next vehicle in the same traffic lane (spacing less vehicle length).

The proportion of road space (length) covered by vehicles. See Occupancy Time, Time Occupancy Ratio.

The time between the detection of two consecutive vehicles when the presence detection zone is not occupied. Space time is equivalent to gap time less the time taken to travel the effective detection zone length. See Gap Setting, Occupancy Time.

Average speed of all vehicles that travel a given section of road during a specified period of time calculated using the average travel time and length for the road section. See Average Travel Speed, Time-Mean Speed.

The distance between the front ends of two successive vehicles in the same traffic lane. See Queue Space, Space Length.

The distance travelled per unit time. In a time-distance diagram, the slope of the time-distance trace of a vehicle is its speed. See Average Travel Speed, Cruise Speed, Free-Flow Speed, Negotiation Speed, Running Speed, Space-Mean Speed, Time-Mean Speed, Uninterrupted Travel Speed.

The ratio of average travel speed to average desired speed. See Average Travel Speed, Desired Speed.

A raised or painted area on a roundabout approach used to separate entering and exiting traffic movements, deflect and slow entering traffic, and provide storage space for pedestrians crossing that intersection approach in two stages.

A two-stage gap acceptance process at a two-way sign-controlled (TWSC) intersection where a median (Island) refuge area is available for minor-street through and turning movements so that drivers sequentially evaluate and use gaps in the near-side major-road traffic stream, followed by gaps in the far-side major road traffic stream. See Full Crossing, Two-Way Sign Control (TWSC).

A condition that arises when a raised median (Island) refuge area is available allowing pedestrians to cross one conflicting traffic stream at a time. See Full Crossing, Signalised Crossing, Staged Signalised Pedestrian Crossing.

A system by which a long signalised pedestrian crossing is divided or “staged” into several time-separated sections, each being controlled with separate Walk signals. See Full Crossing, Signalised Crossing, Staged Pedestrian Crossing.

An intersection in which the carriageway of one road is offset so as not to be continuous across the other road. Left-Right and Right-Left staggered T intersection configurations are possible.

The time between the start of the displayed green period and the start of the effective green period for a movement, which is associated with queue discharge time losses at the start of the green period due to vehicles accelerating to saturation speed, or due to giving way to opposing vehicle or pedestrian movements. See End Gain, Lost Time.

The intergreen interval consisting of yellow and all-red intervals before the start of green display for a phase or a movement. See All-Red Interval, Intergreen Interval, Terminating Intergreen Interval, Yellow Interval.

Duration of the Starting Intergreen Interval.

An instruction to a road user to stop completely and remain stationary and give-way to all Opposing Movements.

A solid line marked across all or part of a road, behind which vehicles should stand when required to stop by traffic signals or regulatory signs. See Give-Way (Yield) Line.

The distance between the signal stop line and the roundabout give -way / yield line on the metered approach of a roundabout with metering signals. See Controlling Approach, Metered Approach, Roundabout Metering Signals.

The average number of all acceleration-deceleration manoeuvres including queue move-ups, partial stops and geometric stops, expressed in terms of equivalent Major Stops.

Delay determined by projecting vehicle time-distance trajectories from the approach and exit negotiation speeds to the stop line (or give-way / yield line). This delay includes the queuing delay and the main stop-start delay associated with deceleration from the approach negotiation speed to zero speed and acceleration back to the exit negotiation speed. See Control Delay, Delay, Geometric Delay, Idling, Queuing Delay.

See Departure Flow Rate.

The travel distance from the upstream stop line to the downstream stop line used to determine the stopline travel time in modelling signal coordination effects as a function of signal offsets in network analysis. See Coordination, Offset, Stopline Travel Time.

The average time to travel from the upstream stop line to the downstream stop line as a parameter used in modelling signal coordination effects as a function of signal offsets in network analysis. See Coordination, Offset, Stopline Travel Distance.

A long island between traffic lanes where the front and back widths may vary.

See Coordination.

T

An intersection where two roads meet (whether or not at right angles) and one of the roads ends.

The intergreen interval consisting of yellow and all-red intervals following the end of of green display for a phase or a movement. See All-Red Interval, Intergreen Interval, Starting Intergreen Interval, Yellow Interval.

Duration of the Terminating Intergreen Interval.

A factor used for estimating the saturation flow rate in vehicles per hour by converting the basic saturation flow rate which is in through car units per hour of an OD movement at signals allowing for its turning characteristics and movement class (through car units per vehicle). This factor is obtained as a product of the passenger car equivalent for a movement class and the turning vehicle factor for an OD movement. See Basic Saturation Flow Rate, Movement, Movement Class, Passenger Car Equivalent, Saturation Flow Rate, Saturation Headway, Through Car Equivalent.

The component of operating cost representing time cost of vehicle occupants (persons) and pedestrians determined using a time value based on the average income per person. See Operating Cost.

The proportion of time in an analysis period when the detector at a given point along the road is occupied by vehicles.  See Occupancy Time, Space Occupancy Ratio.

A factor that converts the average income to a time value per person. See Operating Cost.

Arithmetic average speed of all vehicles as measured at a point along the road for a specified period of time. See Space-Mean Speed.

A plan that defines the cycle time, green splits and offsets for each intersection in a coordinated signal system. See Signal Timing.

The sum of the delays experienced by all vehicles or pedestrians (vehicle-hours per hour or pedestrian-hours per hour), obtained as the product of average delay per vehicle or pedestrian and the flow rate. The total intersection delay (including delay experienced by pedestrians and persons in vehicles determined using the vehicle occupancy per vehicle) is given in terms of total person delay (person-hours per hour). The average intersection delay based for all persons is determined by dividing the total intersection delay by the total flow in persons per hour. See Delay, Vehicle Occupancy.

The time interval with known traffic demand volumes with or without information about the peaking pattern. The value of the total flow period should be equal to or larger than the peak flow period. See Analysis Period, Flow Period, Off-Peak Period, Peaking Parameters, Peak Period, Unit Time for Volumes.

The sum of the distances travelled by all vehicles (vehicle-kilometres per hour or vehicle-miles per hour). Obtained as the product of travel distance per vehicle and the flow rate.

An aggregate measure of percentages of different vehicle classes in traffic. See Light Vehicle, Heavy Vehicle, Movement Class.

The delay due to bunching in uninterrupted (continuous) flow, resulting from bunching, i.e. interactions between vehicles (moving queues) that cause drivers to reduce speed below the free-flow (desired) speed. See Average Travel Speed, Bunching, Cruise Speed, Desired Speed, Free-Flow Speed, Space-Mean Speed, Speed, Time-Mean Speed, Uninterrupted Flow.

See Lane.

See Movement (Traffic Movement)

See Network.

A signal that controls vehicle and pedestrian traffic at an intersection or on a road by means of red, yellow, green or white light displays, and includes circular and arrow signals, pedestrian signals, bicycle crossing signals, bus signals, light rail or tram signals and overhead lane control signals. See Signal Aspect, Traffic Signal Controller.

An automatic device that regulates the sequence and duration of the illumination of red, yellow, green and white vehicle signal aspects and pedestrian walk and don't walk signal aspects. See Signal Aspect, Traffic Signal.

See Simulation Model.

See Volume.

A control method that allows a variable sequence and variable duration of signal displays depending on vehicle and pedestrian traffic demands.

See Average Travel Speed.

A traffic performance measure defined as a function of the Speed Efficiency parameter.

The ability to make a left turn or right turn at a signalized intersection during red signal display, after stopping and only when no conflicting vehicle or pedestrian traffic is present.

The radius of the turning vehicle path. See Entry Radius, Negotiation Radius.

See Movement (Traffic Movement).

A factor used to determine the saturation flow rate of a turning movement at signals in vehicles per hour allowing for its turning characteristics and movement class (through car units per vehicle). This factor is determined using relative saturation (queue discharge) headway values of turning movements and through movements under identical road, traffic and control conditions.. See Basic Saturation Flow Rate, Movement, Movement Class, Saturation Flow Rate, Saturation Headway, Through Car Equivalent.

A lane with two segments (sections in the direction of traffic flow) that can be used by different movememt classes. See Lane Configuration, Movement Class, Short Lane.

The type of traffic control at an intersection where drivers on the minor road controlled by a give-way (yield) or stop sign, or drivers turning from the major road, wait for a gap in the major road traffic to complete a manoeuvre. See Give-Way (Yield), Stop.

U

The range within which a model’s estimate of a value is statistically likely to vary from the actual value. See Reliability.

Traffic flow conditions where the Demand Flow Rate is below Capacity (Degree of Saturation is smaller than 1.0).

A movement that exists at a signalised intersection but is not included in signal timing analysis because the signal control system does not detect the movement. Typically, this applies to slip (bypass) lane movements that do not cross over stop-line detectors in the SCATS control system. The undetected movement specification is not appropriate for control systems where turning vehicles crossing over advanced detector loops, or for fixed-time control systems that use signal plans designed to accommodate all turning vehicles.

A condition in which vehicles travelling in a traffic stream do not have to stop or slow down for reasons other than those caused by the presence of other vehicles in that stream. See Bunching, Interrupted Flow.

Average speed without the effect of intersection delays and delays due to other causes of interruption but including the effect of traffic delay (uninterrupted flow delay) due to bunching in uninterrupted flows. See Average Travel Speed, Desired Speed, Free-Flow Speed, Speed, Traffic Delay, Uninterrupted Flow.

See Gap Setting.

The time interval for specifying volume counts to be used in analysis, e.g. 15 minutes, 30 minutes, 60 minutes. See Total Flow Period.

A left-turn or right-turn movement at a signalised intersection that is made with no opposing or conflicting vehicular or pedestrian flow allowed.

See Crossing, Pedestrian Crossing, Zebra Crossing.

In the direction opposite to the movement of traffic.

A movement class with a set of parameters specified by the model user. See Movement Class.

V

The process by which the analyst checks the overall model-predicted traffic performance for a street–road system against field measurements of traffic performance, on the basis of field data not used in the calibration process. See Calibration.

A phase that can be skipped (included or not included) in a phase sequence. See Variable Phase Sequence.

A phase sequence that contains variable phases. Other phases in the sequence are called compulsory phases. In timing analysis for a variable phase sequence, all possible phase sequences are analysed with variable phases included and not included. For example, for the variable phase sequence A, B1, B2, C, D where B1, B2 are variable phases and A, C, D are compulsory phases, the possible phase sequences are (A, B1, C, D), (A, B2, C, D) and (A, C, D). See Phase Sequence.

See Degree of Saturation.

See Gap Setting.

The average vehicle length for a movement class.

See Mass.

The number of persons per vehicle including the driver that can be specified as an average value for each OD movement and movement class. This parameter is used for calculating various performance statistics in terms of persons rather than vehicles, and is important in determining the operating cost per vehicle allowing for the number of persons per vehicle in calculating time cost per vehicle. See Operating Cost, Time Cost.

The component of operating cost representing vehicle running costs including the resource cost of fuel, as well as tyre, oil, repair and maintenance costs. See Operating Cost.

Parameters used in fuel consumption and emission models that are derived considering fleet composition, and include idling fuel and emission rates, efficiency rates, vehicle mass, maximum engine power, power to weight ratio, number of wheels and tyre diameter, rolling resistance factor, frontal area and the aerodynamic drag coefficient. See Drag Parameters, Efficiency Parameter, Mass.

The method for specifying traffic volume data in the form of (i) separate volumes for individual movement classes, (ii) total volume and per cent value for movement classes, or (iii) total volume and volumes for movement classes.

The number of vehicles or pedestrians passing (arriving or departing) a given point on a lane or carriageway during a specified period of time. See Arrival Flow Rate, Demand Flow Rate, Departure Flow Rate.

W

The duration of the walk display for pedestrians at a signalised intersection or a midblock signalised pedestrian crossing.

The off-road speed of pedestrians walking between intersections (as distict from pedestrian crossing speeds at intersections and midblock pedestrian crossings). The appropriate value of this parameter is the average walking speed. See Crossing Speed.

Y

The signal control interval when yellow signal displays are shown following the green signal display for warning drivers about the impending red signal display. See All-Red Interval, Intergreen Time.

The duration of the Yellow Interval. See All-Red Time, Intergreen Time.

A situation where a driver executing a filter turn manoeuvre at the start of the yellow interval thinks that the signals change to yellow for the opposing traffic at the same time, and therefore proceeds and runs into an opposing through vehicle for which the signal display would still be green. Also known as Lagging Right-Turn / Left-Turn Problem.

See Give Way.

Z

A series of short wide lines marked side-by-side across a carriageway (midblock or at intersections) and the associated regulatory signs to indicate a location where pedestrians may cross a road and have right-of-way over the vehicular traffic. See Crossing, Pedestrian Crossing.